Novo™ 102

16" x 16" PCB Batch Load

The Novo™ 102 is an automated, simple to use low cost selective soldering machine using the proven “traveling mini–solder wave”, featuring the “Super fast” robotic motion to maximize production. It is used to flux and solder through hole components on SMT boards within close proximity of adjacent components. This process overcomes the limitations of operator dependent soldering with a truly flexible automated flux application and molten solder delivery system. The Novo™ 102 couples high throughput with precise process controls. The programmable features provide the tools to set all process parameters, including immersion depths, pre-heat dwells, travel distances and speeds, solder temperature and wave height. Once set, the system will repeat precisely.

Lead Solder Pot-Pump Assy
Heated N²
Programming Camera
KISS Board Warp Compensation System
Solder Level Check
Wave Height Verification
Solder Alloy Verification
Spray Fluxer
Witness Camera
Fiducial Correction System
Included Solder Nozzles
Installation and Training*
Topside Preheater
Precision Drop-Jet Fluxer
Dropjet Verification System
Wave Nozzle Pump
Bullet Nozzle Set
Dual Solder Nozzle Pumps
Solder Pot Service Cart
KISS Pump Maintenance Kit
Dual Monitors
2ⁿᵈ Witness Camera
Lead-free Alloy Solder Pot & Pump
HMP Alloy Solder Pot & Pump
6 Channel Data Logger
Bottom Side Pre-heat
Universal PCB Location Rack
Closed Loop Rotary Encoders
SWAK-OS Offline Programming
Skyhook Fixture
Overall Dimensions: 51" x 57" x 54" (1295mm x 1447mm x 1371mm)
Weight of System: 840 Lbs.
Power: 120VAC/1PH/60Hz 15amps
Preheater Power: 208/220-240VAC/1PH/60Hz 15amps
Air Requirements: Min. 90 PSI • Max. 100 PSI
N² Requirements: 99.999% Pure @ Min. 60 PSI Max. 100 PSI
N² Consumption: 30-60 CFH
Max Work Area: 16" x 16" (400mm x 400mm)
PCB Thickness: Not Limited with proper support
Rail Width Adjust: Programmable

Complete Datasheet: View/Download

Novo™ 102

Additional Equipment

N² Generators

ACE Production Technologies has partnered with Parker to produce the KNG Family of Nitrogen Generators to complement the KISS Selective Soldering systems. These generators are tailored to ACE’s specifications to provide adjustable purity and flow specific to your process. The generators work on the principle of compressed air passing through a series of molecular sieves. The nitrogen molecules are harvested while the O² and other gasses pass through. This process is completely automated requiring only compressed air.

The generators are turnkey requiring only 115VAC and compressed shop air. The controls are all solid state with a color touch screen interface. A digital oxygen meter (included) displays the PPM of oxygen so you can be assured of ab-solute purity.

The KNG generators are available in varying sizes to match the demands of single and multiple KISS machines. They provide continuous high quality nitrogen that is less expensive than cylinder service.